Mercedes star Diagnostic C4 MB Star SD Connect C4 WIFI Setting on Win 10
Mercedes star Diagnostic
C4 software xentry/das now new released v2017.7 xentry with 32 bit.
07.2017 Xentry 32 bit with latest Vediamo V5.01.00 DTS V8 which support
program offline.Star Diagnose Mercedes star Diagnostic C4 Xentry 32bit
with HHtwin for old mercedes. OBD2rpeair.com share you 2017.7 Mercedes star Diagnostic C4 wifi setting guide on win 10 .
Mercedes Diagnostic Tool MB Star SD Connect C4 with CF19 Laptop
OBD2repair.com MB SD Connect C4 Wifi Configuration Mercedes star Diagnostic C4 Star Diagnosis Wifi setting On windows 10:
I’m running Win10 on a Dell XPS15 9550 laptop with Intel AC 8260 internal wireless card installed.
After days of investigation and testing, the most important thing to understand is this. The drivers for your wireless card MUST support AdHoc functionality. The drivers are the secret sauce that makes this possible. This can be verified at the DOS command prompt. The command is: netsh wlan show drivers
This command will show “Yes” or “No” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly.
Although I’m running Win10, Intel has drivers for the 8260 wireless card for Win8 which will enable proper AdHoc functionally.
The trick is to download the driver first, prior to removing your existing wireless driver. Download the driver ONLY, not any driver file with additional driver management apps included in the downloaded file.
Now you can go into Device Manager and remove your existing wireless card AND check the box that removes all software associated with it. My Win8 driver download file was a .exe file. I double clicked on it and the Win8 driver for my Intel 8260 card was installed. Went to Device Manager, right clicked on my 8260 wireless card and selected Properties. Clicked on Advanced and was able to see several AdHoc related entries. These AdHoc entries were not visible using the Win10 drivers.
AdHoc can now be verified at the DOS command prompt. The command is:
netsh wlan show drivers
This command will show “Yes” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly
With AdHoc functionality confirmed, additional DOS commands can now be used to enable Road24h wireless connectivity. The procedures for the additional steps required are well documented in MHHAUTO forum or GOOGLE.
This is what worked for me. Depending on your computer skills, your results may vary.
If you find my posting to be of help to you, Thanks and Rep would be most appreciated.
Mercedes Diagnostic Tool MB Star SD Connect C4 with CF19 Laptop
OBD2repair.com MB SD Connect C4 Wifi Configuration Mercedes star Diagnostic C4 Star Diagnosis Wifi setting On windows 10:
I’m running Win10 on a Dell XPS15 9550 laptop with Intel AC 8260 internal wireless card installed.
After days of investigation and testing, the most important thing to understand is this. The drivers for your wireless card MUST support AdHoc functionality. The drivers are the secret sauce that makes this possible. This can be verified at the DOS command prompt. The command is: netsh wlan show drivers
This command will show “Yes” or “No” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly.
Although I’m running Win10, Intel has drivers for the 8260 wireless card for Win8 which will enable proper AdHoc functionally.
The trick is to download the driver first, prior to removing your existing wireless driver. Download the driver ONLY, not any driver file with additional driver management apps included in the downloaded file.
Now you can go into Device Manager and remove your existing wireless card AND check the box that removes all software associated with it. My Win8 driver download file was a .exe file. I double clicked on it and the Win8 driver for my Intel 8260 card was installed. Went to Device Manager, right clicked on my 8260 wireless card and selected Properties. Clicked on Advanced and was able to see several AdHoc related entries. These AdHoc entries were not visible using the Win10 drivers.
AdHoc can now be verified at the DOS command prompt. The command is:
netsh wlan show drivers
This command will show “Yes” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly
With AdHoc functionality confirmed, additional DOS commands can now be used to enable Road24h wireless connectivity. The procedures for the additional steps required are well documented in MHHAUTO forum or GOOGLE.
This is what worked for me. Depending on your computer skills, your results may vary.
If you find my posting to be of help to you, Thanks and Rep would be most appreciated.
More detail about mercedes star diagnostic,pls connect
Website:www.obd2repair.com
Skype：obd2repair / eobdscan1
Whatsapp (+86)13728823163
Email: info@obd2repair.com
评论
发表评论